Setup windows test client

Main

Step by step installation and documentation for Windows (lots of screnn shots). Goal: Adding a Windows test client to our myLVS environment Windows Server 2012 (using your own license key) IIS installed Computer name used: myLVS-Win-Client IP Address: 192.168.2.221 Loopback IP Address: 192.168.2.220

Overview

Add a new loop back device

Click on Run

Enter mmc devmgmt.msc to open the Device Manager

Right mouse click on your computer, select Add legacy hardware

Confirm

Select the advanced option

Select Network adapters

Select Microsoft Select Microsoft KM-Test

Confirm

Confirm again

Configure the new loop back device

Within Windows, goto the Network connections,
with Server 2012 you can run and type ncpa.ctl

Rename to loopback adapter to loopback, rename the ethernet adapter to lan

Edit the properties of IPv4 of the loopback adapter

Enter the VIP (Virtual IP) = 192.168.2.220/24, click Advanced

Disable Automatic metric, make the adapter aware of the ARP issue Enter a high number, like 254, click OK

Open an administrative console and enter:

netsh interface ipv4 set interface "lan" weakhostreceive=enabled
netsh interface ipv4 set interface "loopback" weakhostreceive=enabled
netsh interface ipv4 set interface "loopback" weakhostsend=enabled

See this for more information about those commands:

• http://blog.loadbalancer.org/direct-server-return-on-windows-2008-using-loopback-adpter/

Testing the new loop back device

From the Windows host try to open the URL http://192.168.2.220 http://192.168.2.221 From an Network client try to open the URL http://192.168.2.221

The result should be the default IIS Webpage

Goto myLVS and enable the Windows host and

see the connection list: