Setup myLVS Monitoring: Difference between revisions

Revision as of 19:58, 25 July 2015

Setup myLVS Monitoring

Goto Setup/Server and then to Monitor Nodes/Server, click add and fill as shown:

Process view:

Description of the above screen

Name	Description
Link	The name of the machine
Recovery	Set the profile for recovery
Check Command	Set the generic http check
Timeout	Timeout to be used whil connect to the service
Rechecks	Amount of rechecks before consider a failed state
Notification Interval	The interval for sending messages in seconds
Check Inventory	That means to shut down all associated services in case of a failures

Name	Description

Immediate Recovery	The reover command to be used when this service gets in failed state the first time
Interval	The monitor check interval in seconds
Failcheck Interval	The monitor check interval when detecting a failure in seconds
ReCheck Wait	Pause between the retry command
Notification To	Choose the profile for messaging
Enable	En/Disable the profile

@@ Line 16: / Line 16: @@
 Description of the above screen<br>
-{| width="70%"
+{| width="65%"
 | valign="top" |
 {| class="wikitable"
@@ Line 46: / Line 46: @@
 |  Immediate Recovery   || The reover command to be used when this service gets in failed state the first time
 |-
-|  Recovery || Set the profile for recovery
+|  Interval || The monitor check interval in seconds
+|-
+|  Failcheck Interval || The monitor check interval when detecting a failure in seconds
 |-
-|  Check Command || Set the generic http check
+|  ReCheck Wait || Pause between the retry command
 |-
-|  Timeout || Timeout to be used whil connect to the service
+|  Notification To || Choose the profile for messaging
 |-
-|  Rechecks || Amount of rechecks before consider a failed state
+|  Enable || En/Disable the profile
 |}
 |}